If the newsletter is not displayed correctly, you can view it in the browser window. |
|
|
| | Dear Newsletter Subscriber,
do you already know our special materials? They are monitored and controlled by means of a close-meshed net of quality assurance measures during the entire production process to guarantee the highest quality based on our technical expertise. Todays application example is all about stator blades in pumps and turbines. Plain bearing bushes made of the KS PERMAGLIDE® material P11 are ideally suited for this application. Find out more in our latest application example.
We hope you find our information useful. Petra Mayerhöffer Senior Manager Sales Industry MS Motorservice Deutschland GmbH
|
| | | | |
|
|
|
|
|
| | | | | | KS PERMAGLIDE® special productions | | | | |
| |
| |
|
| | | | | Special materials for plain bearings | | Sliding elements of the most varied shapes are produced from this composite by cutting, punching and forming. Flange bushings composed of wrapped bushes and punched thrust washers are joined by applying a newly developed laser welding method and boast a series of benefits compared to the standard forming process. Depending on each specific case of application, at the end of the process a fine-tuned corrosion protection treatment is performed.
|
| | | | |
| |
|
|
|
|
|
| | | | | | KS PERMAGLIDE® application examples | | | | |
| |
| |
|
| | | | | KS PERMAGLIDE® plain bearings: stator blades in pumps and turbines | | In storage power stations, water is pumped into higher-lying storage reservoirs using cheap night-time electricity. At energy demand peaks, the water is allowed to low back down to drive a turbine. In the process, the turbine drives a generator to produce electricity. In order to set the optimum operating point in the pump as well as in the turbine operation, swivelmounted stator blades are itted between the ring channel and impeller. Advantages of KS PERMAGLIDE® P11 plain bearing bushes: - Does not absorb water
- Largely resistant to swelling
- High corrosion resistance thanks to bronze backing, no additional corrosion protection required
- Maintenance-free
- Low wear
- Good chemical resistance, especially suitable for use in aggressive media
- Operating temperature range of –200 °C to +280 °C
- Very low stick-slip tendency
- Low friction value
|
| | | | |
| |
|
|
|
|
|
| | | | | | KS PERMAGLIDE® Product and Service Information | | | | |
| |
| |
|
| | | | | | | KS PERMAGLIDE® Plain Bearings: Recommendations for Lubrication of Plain Bearings | | Low-maintenance plain bearings are generally lubricated with grease. The quantity of grease applied during installation is normally sufficient for the entire service life. If a grease-lubricated plain bearing is used in difficult conditions, subsequent lubrication is recommended.
|
| | | | |
| |
|
|
|
| | | | imprint | | MS Motorservice Deutschland GmbH Rudolf-Diesel-Straße 9 71732 Tamm, Germany Telefon: +49 (0) 7141 / 8661 - 434 Telefax: +49 (0) 7141 / 8661 - 430
| Germany
| | | | |
| | Court of registration HRB 104442 Corporate Headquarters Tamm General Manager Tobias Hocker - Hans-Peter Türk
|
| | | | This e-mail and any attachments transmitted with it are confidential and intended solely for the person specified or their representative. If you are not the designated recipient of this e-mail or their representative, or if the content of this e-mail is identifiably not for you, please notify the sender immediately and delete this e-mail from your system. Please note that any form of unauthorized use, publication, reproduction, copying or disclosure of the contents of this e-mail is not permitted and constitutes a breach of confidence against which legal proceedings may be instituted. For internal statistical purposes as well as to improve the quality of our newsletter and/or website, non-personal data is stored when you access our newsletters, this allows us to relate to your customer data. | | | | If you do no longer wish to receive the newsletter, please click here: | |
| | |
|
| | | | |
|